LAUSR

Freestanding, robust electrodes with high capacity and long lifetime are of critical importance to the development of advanced lithium–sulfur (Li–S) batteries for next‐generation electronics, whose potential applications are greatly limited by the lithium polysulfide (LiPS) shuttle effect. Solutions to this issue have mostly focused on the design of cathode hosts with a polar, sulfurphilic, conductive network, or the introduction of an extra layer to suppress LiPS shuttling, which either results in complex fabrication procedures or compromises the mechanical flexibility of the device. A robust Ti3C2Tx/S conductive paper combining the excellent conductivity, mechanical strength, and unique chemisorption of LiPSs from MXene nanosheets is reported. Importantly, repeated cycling initiates the in situ formation of a thick sulfate complex layer on the MXene surface, which acts as a protective membrane, effectively suppressing the shuttling of LiPSs and improving the utilization of sulfur. Consequently, the Ti3C2Tx/S paper exhibits a high capacity and an ultralow capacity decay rate of 0.014% after 1500 cycles, the lowest value reported for Li–S batteries to date. A robust prototype pouch cell and full cell of Ti3C2Tx/S paper // lithium foil and prelithiated germanium are also demonstrated. The preliminary results show that Ti3C2Tx/S paper holds great promise for future flexible and wearable electronics.