LAUSR

The two-step sequential deposition process is demonstrated as a reliable technology for the fabrication of efficient perovskite solar cells (PVSCs). However, the complete conversion of dense PbI2 to perovskite in planar PVSCs is tough without mesoporous titanium dioxide as support. Herein, multifunctional capsules consisting of zeolitic imidazolate framework-8 (ZIF-8) encapsulant and formamidinium iodide (FAI) are introduced between tin oxide (SnO2 ) and lead iodide (PbI2 ) layer. Intriguingly, the capsule dopant interlayer benefits the formation of porous PbI2 film due to the porous nanostructure of ZIF-8 which is favorable for the subsequent intercalation reaction. Furthermore, the constituent of the perovskite precursor in ZIF-8 pores can convert into the crystal nuclei of perovskite by reacting with PbI2 first, thereby promoting further perovskite crystallization. Significantly, the incorporation of ZIF-8 can enhance the resistance of perovskite against ultraviolet (UV) illumination due to down-conversion effect. Consequently, the modified device achieves a champion power conversion efficiency (PCE) of 24.08% and displays enhanced UV stability, which can sustain 83% of its original PCE under 365 nm UV illumination for 300 h. Moreover, the unencapsulated device maintains 90% of initial PCE after 1500 h storage in dark ambient conditions with a relative humidity range of 50∼70%. This article is protected by copyright. All rights reserved.