LAUSR

Sodium‐rich coals are suitable raw materials for direct coal liquefaction (DCL). However, sodium species in coals, especially exchangeable ones, can significantly reduce oil yield. In this work, to increase oil yield in direct liquefaction of sodium‐rich coals, a feasible method using organic solvents to pretreat sodium‐rich coals is proposed. Initially, sodium‐rich coal was thermally treated with tetralin or 1‐methylnaphtalene. Then, raw coal and all the treated coals were liquefied under the same conditions to evaluate the effects of thermal treatment on structural changes of coal molecules and oil yield. The results show that surface areas of the treated coals increased to 7.86 m2/g at most, which was favorable for combination between hydrogen and coal molecules during the DCL process. More importantly, the content of hydrogen in the treated coals was 0.95 wt% higher than that of raw coal on average, suggesting that treated coals could be later liquefied at mild conditions. Raman spectra demonstrated that during thermal treatment with tetralin, small aromatic ring systems in raw coal were prehydrogenated and transformed into nonaromatic systems. The pre‐hydrogenation of the coal matrix definitely contributes to the increase in oil yield. In view of sodium species distribution in the treated coals, it is proved that tetralin can promote the transformation of exchangeable sodium species into other chemical forms more easily than 1‐methylnaphtalene, which implies that tetralin has more positive effects on the increase of oil yield. Compared with that of raw coal, oil yields in direct liquefaction of the samples treated by tetralin increase by 14.0 to 15.1 wt% (daf).