LAUSR

Abstract Background Radiofrequency Ablation (RFA) is rarely performed in veterinary medicine. A rationale exists for its use in selected cases of canine liver tumours. RFA induces ablation zones of variable size and geometry depending on the technique used and on the impedance of the targeted organ. Objectives (a) to describe the geometry and reproducibility of the ablation zones produced by three commercially available systems from a single company, using isolated swine liver parenchyma as a model for future veterinary applications in vivo; (b) to study the effects of local saline perfusion into the ablated parenchyma through the electrode tip and of single versus double passage of the electrode on size, geometry and reproducibility of the ablation zones produced. Methods Size, and geometry of ablation zones reproduced in six livers with one cooled and perfused (saline) and two cooled and non‐perfused systems, after single or double passage (n = 6/condition), were assessed macroscopically on digitalized images by a blinded operator. Longitudinal and transverse diameters, equivalent diameter, estimated volume and roundness index were measured. Reproducibility was assessed as coefficient of variation. Results and Conclusions Ablation zone reproducibility was higher when expressed in terms of ablation zone diameters than estimated volume. Local saline perfusion of the parenchyma through the electrode tip during RFA increased the ablation zone longitudinal diameter. Ablation zone estimated volume increased with saline perfusion only when double passage was performed. These data may provide useful information for those clinicians who intend to include RFA as an additive tool in veterinary interventional radiology.