LAUSR

PurposeThis article investigates the qualities and thermal effects of a novel electrosurgical device (PT) which has been designed by ERBE Elektromedizin GmbH, Germany, for the preparation of critical locations such as in skin-sparing or nipple-sparing techniques and compares it to a standard device (SD) in a porcine ex vivo breast model using an heat map generated by infrared thermography.MethodsIn total, 42 abdominal wall specimens of porcine tissue consisting of the skin and the underlying subcutaneous and muscle layer were alternately dissected using one of the devices and pre-settings. During the preparation with the two devices, the epicutaneous temperature was measured by an infrared camera (VarioCam, Jenoptik, Germany) and the maximum temperature as well as the slope of the temperature rise was analysed.ResultsThe use of PT shows significantly lower values for $$ \overline{{\Delta T_{\text{max} } }} $$ΔTmax¯ compared to SD. This effect was independent from the chosen mode. Using the same instrument in different modes, the use of AutoCut mode showed a significant reduction of $$ \overline{{\Delta T_{\text{max} } }} $$ΔTmax¯ at all indicated time points (SD: p < 0.0001 and PT: p < 0.0001). In summary, the combination of AutoCut + PT showed the lowest rise in temperature, whereas the combination of DryCut + SD led to the highest rise in temperature. The temperature difference between these two settings was 13.84 °C, which means a possible temperature reduction of 67% can be achieved by the right choice of device and its tailored mode.ConclusionsThe novel PT shows a significant reduction in epicutaneous temperature and a significant reduction of the slope of temperature rise most probably by a more focused application of energy compared to SD.