LAUSR

A cost effective and reliable technology for the fabrication of electrochemical test-cell arrays for battery materials research, based on batch-fabricated glass micro packages was developed and tested. Jet dispensing was investigated for the first time as a process for fabricating battery electrode arrays and separators and compared to micro dispense printing. The process shows the reproducibility over the whole range of investigated materials and battery cell structures that is required for battery materials research. Such setup gives rise to a significantly improved reliability and reproducibility of electrochemical experiments. Cost-effective fabrication of our test chips by batch processing allows for their single-use in electrochemical experiments, thereby preventing contamination issues due to repeated use as in conventional laboratory test cells. In addition, the integration of micro pseudo reference electrodes is demonstrated. Thus, the test cell array together with the developed electrode/electrolyte deposition technology provide a highly efficient tool for speedy combinatorial and high throughput testing of battery materials on a system level (full cell tests). Experimental results are shown for the microfabrication of lithium-ion test cells with help of several electrode and binder materials. The influence of jetting parameters on electrode lateral dimensions and thickness, reproducibility of the electrode mass as well as the use of integrated micro-reference electrodes for impedance spectroscopy and cyclic voltammetry measurements in micro cells are presented in detail.