LAUSR

In this study, nitrogen oxides emission reduction is investigated with humid combustion in a non-premixed combustion chamber of a gas turbine that burns natural gas using computational fluid dynamics. For humidification of the combustion chamber, two methods are studied: direct water injection into the combustion chamber and increasing the inlet air humidity. The mathematical model of combustion, governing equations, numerical method, and the combustion chamber properties are extensively discussed. The mathematical model is first validated. The two approaches are then simulated and compared for low water and steam flow rates. The results show that at the water to fuel ratio of about 1, direct water injection is 1.69 times more efficient than increasing inlet air humidity in reducing nitrogen oxide emission. Finally, it is concluded that direct water injection is appropriate at low flow rates (up to the fuel flow rate) and for situations where reducing nitrogen oxide emission is highly relevant. Furthermore, increasing the humidity of the inlet air up to 25% is suitable and increases the combustion efficiency and reduces pollutants, while the outlet temperature is not decreased too much.Graphical abstract