LAUSR.org creates dashboard-style pages of related content for over 1.5 million academic articles. Sign Up to like articles & get recommendations!

Initial assessment of BDS-3 preliminary system signal-in-space range error

Photo from wikipedia

The basic constellation of the BeiDou global satellite navigation system (BDS-3) had been successfully completed by the end of 2018. It included 18 medium earth orbit satellites and 1 geostationary… Click to show full abstract

The basic constellation of the BeiDou global satellite navigation system (BDS-3) had been successfully completed by the end of 2018. It included 18 medium earth orbit satellites and 1 geostationary orbit satellite. An initial assessment of BDS-3 broadcast orbit and clock accuracy based on 55 days of broadcast message data is presented in this contribution. Satellite positions and clock offsets derived from broadcast ephemeris are compared with precise orbit determination orbits and clock offsets. Furthermore, the corresponding signal-in-space range error (SISRE), which is of most interest to navigation users, is computed. Thanks to the new inter-satellite link payloads on BDS-3 satellites, the statistics of age-of-data-ephemeris and age-of-data-clock demonstrate that more than 98% of ephemerides and 93% of clock parameters are updated within only one hour. Experimental results show that the 3D root mean square (RMS) of broadcast orbit errors is less than 0.6 m for the overall constellation. The broadcast orbit is also assessed by satellite laser ranging measurements, giving an RMS of 7.3 cm. The orbit-only SISRE is about 0.1 m. With respect to clock errors, the timescale differences between two clock products are eliminated to assess the accuracy of broadcast clock offsets. The standard deviation value of 0.25 m shows a good performance, but the RMS value is regrettably nearly 0.5 m due to a nonzero mean bias. RMS of BDS-3 SISRE amounts to approximately 0.5 m, which is largely attributed to clock errors. Finally, a positioning experiment is conducted to analyze the accuracy of single point positioning (SPP). With 95% confidence level, the horizontal accuracy is less than 5 m, and the vertical accuracy is close to 6 m. Considering that the nonzero mean bias in clock errors may affect the performance of SPP, we correct the nonzero mean value by a satellite-specific constant to analyze the influence of clock bias on the SPP performance. The results show that improvement in the 3D position accuracy can be up to 11%, especially in the up direction.

Keywords: signal space; initial assessment; accuracy; assessment bds; clock; orbit

Journal Title: GPS Solutions
Year Published: 2019

Link to full text (if available)


Share on Social Media:                               Sign Up to like & get
recommendations!

Related content

More Information              News              Social Media              Video              Recommended



                Click one of the above tabs to view related content.