LAUSR

This paper presents a low-power, high-performance current-feedback instrumentation amplifier (CFIA) for portable bio-potential sensing applications. Noise analysis is performed to assign an optimized current for the input stage of the amplifier. Analysis on selecting nested chopping frequencies is performed, further reducing 1/f noise and the residual offset. Enhanced power efficiency is achieved by sharing cascode branches and using a Class-AB output stage. Through these methods, a good balance between noise performance and other parameters such as output ripples and power consumption of the ripple reduction feedback loop (RRFL) is achieved. The amplifier is developed using a 1-poly 6-metal 0.18 μm CMOS process. Three gain stages with a gain-boosting input stage provide a low-frequency, open-loop gain >250 dB. When configured to a closed-loop gain of 60 dB, the amplifier achieves a noise voltage density of 18 $${\text{nV}}/\sqrt {{\text{H}}z}$$nV/Hz and a 1/f noise corner of 3 Hz. With a current of 75 μA and a supply voltage of 3.3 V, a CMRR of 110 dB and a PSRR of 120 dB are achieved, with an average input offset of about 6.5 μV. The amplifier achieves a state-of-art noise efficiency factor of 4.2. Practical application of the CFIA is demonstrated with an in vivo electrocardiogram detection.