LAUSR

Recirculating aquaculture systems (RAS) can emit total phosphorus (TP) concentrations in their discharge water, which exceed environmentally tolerated restrictions. A compact phosphorus (P) elimination module has been developed and its performance has been tested using the discharge water from a commercial scale freshwater RAS for pike perch (Sander lucioperca) production. To enable its widespread and easy use in practical conditions, the standard principle of chemical-physical phosphorus elimination was adapted to the conditions prevalent in RAS operations. The effect of different precipitants and flocculants in RAS discharge water was studied in laboratory trials. When it came to the TP-elimination performance and the environmental impact, the combination of iron(III) chloride and calcium hydroxide proved highly suitable as the precipitation and flocculation agents. Based on the results that were obtained, a commercial scale P-elimination module was designed. The module was equipped with a 500-L hopper-bottomed reaction tank, dosing units for the precipitation and flocculation agents and valves for the automatic discharge of sludge and cleared water. The TP-elimination potential in different operational modes and retention times was examined. The amounts of excess sludge and cleared water quality were evaluated. The designed 500 L P-elimination module works in automatic batch mode and enables operators to eliminate approx. 95% of the phosphorus emissions from the discharge water from a RAS for annual fish production of about 20 to 25 t. It was possible to achieve TP concentrations of below 1 mg L−1 in the module’s cleared water discharge.