LAUSR

In this work, the preparation of foam-gelcasting was simplified with a copolymer of isobutylene and maleic anhydride (Isobam), avoiding the traditional gelling system including many additives such as monomer, cross-linking agent, initiator and catalyst. Highly porous yttria-stabilized zirconia (YSZ) ceramics with 76.2–84.9% porosity were prepared via foam-gelcasting method using YSZ powder as the raw material, Isobam as the dispersant and gelling agent, triethanolamine lauryl sulfate as the foaming agent and sodium carboxymethyl cellulose as the foam stabilizing agent. The effects of solid loading, the content of foaming agent as well as sintering temperature were investigated. With the increase in solid loading of slurries, lower porosity was obtained, and the compressive strength and thermal conductivity showed a tendency of increase. Porous YSZ ceramics with compressive strength of 0.69–3.66 MPa showed low thermal conductivity in the range of 0.137–0.254 W/(m·K) at room temperature. The as-prepared sample showed good thermal insulating performance at high temperature. The km in GM model was during 0.4–0.7, which indicated the pore structure containing the internal and external porosities. This work provides a facile method for the fabrication of porous YSZ ceramics which can be potentially applied as thermal insulation materials at high temperature.