LAUSR

Chemically treated acetic anhydride (AA) flax fiber mats were investigated. Bio-based epoxy resin and conventional epoxy resin unidirectional fiber composites were manufactured using a vacuum bagging technique. Flax fibers in the bio-resin composites were chemically treated with 1, 2, 3 and 4% (AA), while the fibers used with the conventional resin were not treated. The composites with the conventional resin were compared with the bio-resin in an untreated condition. A 2% AA treatment improved the bio-resin composite tensile strength, stiffness and bond shear strength by 55%, 58% and 7%, respectively. These three properties were evaluated and the results statistically analyzed using ANOVA. The AA reduced moisture absorption intake and improved adhesion of the fiber/matrix interface. The composites treated with 1–2% AA were most successful with a 65% moisture resistance. The scanning electron microscope was used to observe the fiber surface and fractured surfaces of the untreated and treated flax fibers. A chemical pre-treatment has improved the composite mechanical and moisture resistance over the non-treated fiber composites.