Liquefaction is one of the most destructive secondary effects caused by large earthquakes, which is most common in saturated soil deposits. In the present study, liquefaction potentials of soils in… Click to show full abstract
Liquefaction is one of the most destructive secondary effects caused by large earthquakes, which is most common in saturated soil deposits. In the present study, liquefaction potentials of soils in the southern part of Ahmedabad district of Gujarat state in western India are determined and a liquefaction potential map is prepared. For preparing this map, we studied lithology of the area, geotechnical soil properties, standard penetration resistance (N1)60, ground water level and peak ground acceleration. The liquefaction potential was determined using Japan Road Association method based on standard penetration test (SPT). We analyzed data from 63 boreholes for estimating liquefaction potential. N-value correction for SPT was carried out and normalized to achieve a standardized value of (N1)60. Peak ground acceleration (PGA) levels of 0.19 and 0.30 g are considered for the analysis. The results of the analyses indicate that the presence of predominantly clayey soil with high plasticity does not give high liquefaction. The liquefaction potential index maps are produced which can be used effectively for development plans and risk management practices in this area.
               
Click one of the above tabs to view related content.