LAUSR

This study proposes a method for manufacturing a whispering gallery mode (WGM) optical fiber probe used for measuring glucose. The principle of the WGM optical fiber probe consists of the bending interference that occurs between the core mode and cladding mode. 3D printing technology was used to create a mold for the optical fiber sensor so that the bent optical fiber sensor was fixed within the mold to ensure a stable bend radius. This method of fabrication allows for easier installation and replacement of the resulting optical fiber compared to WGM optical fiber sensors fabricated by traditional methods. The results of the concentration test showed that as the glucose aqueous solution concentration increased from 0 to 10%, the wavelength was red shifted and the transmission loss gradually increased. At a bend radius of 3.1 mm and an etching diameter of 46 μm, the wavelength sensitivity was 1.475 nm/% and the R-squared value was 0.983, indicating an extremely high sensitivity. These results confirm that the WGM optical fiber probe created in this study can be used to measure glucose concentrations with high sensitivity, and that it is relatively easy to manufacture, install, and replace. Therefore, the proposed WGM optical fiber probe exhibits good performance and is suitable for use as a glucose concentration sensor.