We demonstrate a passively Q-switched erbium doped fiber laser (EDFL) based on quantum dots (QD) CdSe as a saturable absorber (SA). The synthesized CdSe powder was embedded into a poly(methyl… Click to show full abstract
We demonstrate a passively Q-switched erbium doped fiber laser (EDFL) based on quantum dots (QD) CdSe as a saturable absorber (SA). The synthesized CdSe powder was embedded into a poly(methyl methacrylate) (PMMA) using emulsion polymerization process. The film is sandwiched between two fiber connector via an adapter to form a fiber-compatible SA device. By integrating the SA device into the EDFL ring cavity, the stable Q-switched operation is achieved at 1559.35 nm as the pump power is varied within 30–118 mW. The laser has a pump threshold of 20.4 mW. The pulse repetition rate shows an increasing trend from 33.2 to 68.45 kHz, whereas the pulse width exhibits a decreasing trend from 10.04 to 4.30 μs as the pump power is increased from 30 to 118 mW. The highest pulse energy of 11.83 nJ is obtained at a pump power of 118 mW. These results indicate that QD CdSe is a promising SA for Q-switching laser operation.
               
Click one of the above tabs to view related content.