LAUSR

PurposeThe purpose of this study was to explore the feasibility of developing amorphous solid dispersion (ASD) by inducing acid-base interaction at an elevated temperature using hot melt extrusion.MethodsItraconazole and glutaric acid, which do not form salt with each other, were selected as, respectively, model basic drug and weak organic acid. A 1:4:1w/w mixture of itraconazole, glutaric acid and a polymer, Kollidon®VA64, was melt extruded at 95°C. The ground extrudate was characterized by DSC and PXRD and then tested for dissolution at pH 1.2, followed by a change in pH to 5.5.ResultsDespite the high melting point of 168°C, itraconazole dissolved in glutaric acid at around the melting temperature of acid (~98°C), and physically stable ASD was produced when the formulation was extruded at 95°C. Capsules containing 100-mg equivalent of itraconazole dissolved rapidly at pH 1.2 producing highly supersaturated solution. When the pH was changed from 1.2 to 5.5, very fine suspensions, facilitated by the presence of Kollidon®VA64, was formed.ConclusionsPhysically stable ASD of itraconazole with high drug load was prepared by interaction with glutaric acid in a hot melt extruder. This may be used as a platform technology for the development ASD of most poorly water-soluble basic drugs.