LAUSR

The present study focused on phosphorus adsorption by novel fungal conidiophores biomass in aqueous solution. Fungal Conidiophores biomass was prepared from the fungal strains Aspergillus oryzae (YFK) and Fusarium oxysporum (YVS2). The functional groups and morphology of Conidiophores Biomass (CB) from these strains were characterized by FTIR and SEM. FTIR confirms the presence of alcohol, carboxylic acid, carbon dioxide, cyclic alkene, amine, alkene, fluoro compound, and halo compound groups. Batch mode study was carried out with two CB’s such as Aspergillus oryzae CB (ACB) and Fusarium oxysporum CB (FCB) with initial concentration of phosphorus ranging from 20 to 100 mg L −1 . Based on the batch experiments, the adsorption kinetics (pseudo first order and pseudo second order), isotherms (Freundlich and Langmuir models), and thermodynamic (standard entropy, energy, and enthalpy) parameters were calculated. The adsorption kinetics and isotherm studies showed that the adsorption data well fitted with PSO kinetic model. From the isotherm results, it was found that ACB and FCB exhibited highest adsorption capacity 25.64 mg g −1 and 26.32 mg g −1 of phosphorus respectively at the optimal condition of pH (7), time (90 min), dose (250 mg), and room temperature (35 °C). Thermodynamics values were found to be endothermic and spontaneous in nature for phosphorus adsorption. Finally, the results suggested that the ACB and FCB are economically feasible cost-effective adsorbent for removal of phosphorus in wastewater treatment. Graphical abstract