LAUSR

The article presents the concept of using 3D printing technology in ceramic foundry filter manufacturing. They are a crucial component for obtaining an acceptable quality of nickel superalloys by carrying out the process using the precision casting method. Commonly used filters of this type have a number of disadvantages. They are characterized by irregularity of the filtering structure, high brittleness, lack of resistance to mechanical shocks, and impacts of a stream of liquid metal. All these factors create a risk of introducing the material from the damaged filter into the casting mold, which translates into contamination of the casting alloy, and thus the occurrence of casting defects such as nonmetallic inclusions. The hope for a change in this state of affairs is the use of additive manufacturing technology in their production, which by assumption will allow to obtain a product with a repeatable shape, high mechanical resistance, and a specially designed structure regulating the flow of liquid metal into the mold during casting. The suitability of robocasting and binder jetting technology for producing filtration structures was initially assessed. The results have presented the selection of ceramic powder, as well as the development of the composition of the ceramic paste. The parameters of paste preparation and 3D printing individual processes were described. Moreover, the representative microstructures and basic mechanical properties of samples obtained by both of the compared technologies were presented. Furthermore, the final effect of prototype casting filters with a repeatable shape, manufactured with the use of both technologies, was presented, which were transferred for further technological research in a foundry producing critical aircraft engine parts. The possibilities of using each technology in various applications were also discussed.