LAUSR

Open-die forging is an incremental forming process, which is mainly used for the production of large parts with high requirements regarding the mechanical properties and reliability of the forged parts. Finite element analysis (FEA) is able to simulate open die forging sequences. It is therefore very suitable to confirm, whether a selected schedule will be successful in terms of reaching the desired geometry and internal product quality. However, it is comparably slow and therefore not suitable for early process design, when out of an almost infinite number of potential sequences of strokes, an appropriate pass schedule needs to be designed. This is today usually achieved by pass schedule planning software, which takes into account volume constancy, empirical spread behavior and average temperature evolution. However, they do not account for product quality characteristics like microstructure and voids closure. In this paper recently developed fast models, which are able to calculate the temperature, equivalent strain and microstructure evolution along the core fibre of a forged workpiece are coupled with an optimization algorithm to allow automatic pass schedule layout and optimization. Different cost functions are evaluated regarding their impact on the resulting properties of the workpiece. The results indicate that for an overall optimization of open-die forging processes different phenomena and influencing parameters need to be considered, since all of these parameters have a significant influence on the resulting properties such as equivalent strain, temperature and grain size of the ingot.