It is well known that the mechanical properties of hypoeutectic Al–Si alloys are influenced by the size, morphology and distribution of primary α-Al dendrites, eutectic Si crystals and other intermetallics.… Click to show full abstract
It is well known that the mechanical properties of hypoeutectic Al–Si alloys are influenced by the size, morphology and distribution of primary α-Al dendrites, eutectic Si crystals and other intermetallics. In the present work, the effect of Mg addition on the size and morphology of the primary α-Al dendrites and eutectic Si phases in Al–7%Si alloy has been investigated. The microstructure of as-cast samples with different Mg content was characterized by scanning electron microscopy. Microstructural analyses demonstrated that primary α-Al was significantly refined from coarse dendrites to fine equiaxed grain with increasing the amounts of Mg. In addition, the eutectic Si structure was modified from coarse needle-like/platelet-like structure to a fine coral-like fibrous structure. The mechanical properties were investigated by tensile test with various concentrations of Mg. It was found that the ultimate tensile strength improved by 61% with an increase in Mg content. However, the ductility initially increased by 80% with an increase in Mg content from 0.5 to 1.5%, then it decreased with further increasing Mg content up to 2.0 and 2.5%. It is due to precipitation of coarse Chinese script Mg2Si phase that leads to the increase in strength and the decrease in ductility.
               
Click one of the above tabs to view related content.