LAUSR

Pouring position as the input heat source has great influence on the temperature field evolution. In this study, the Flow3D simulation software was applied to investigate the influence of pouring methods (with fixed or moving pouring channel) on AZ91 Mg alloy horizontal centrifugal casting (HCC) process. The simulation results show that the moving pouring channel method can effectively increase the cooling rate and formability of casting pipe. The casting experiment shows that an AZ91 Mg alloy casting pipe with homogeneous microstructure and clear contour was obtained by the moving pouring channel method, and the grain size of the casting pipe is significantly decreased. Meanwhile, serious macro-segregation appeared in the AZ91 casting pipe by the fixed pouring channel HCC process. Compared with the fixed pouring channel, the moving pouring channel can remarkably improve the ultimate tensile strength and elongation of the AZ91 HCC pipe from 142.2 MPa to 201.5 MPa and 6.2% to 6.7%, respectively.