LAUSR

Abstract In this paper, initially two Moore Antennas are designed which are different from each other in terms of 50 Ω microstrip transmission line only. Same size Feed line is applied at right and left side of the substrate and termed as Left Side Feed Line (LFL) and Right Side Feed Line (RFL). To improve the multiband behavior of Moore Antenna, it is being fused with Koch curve and resultant antenna is named as Moore – Koch Hybrid Fractal Antenna (MKHFA) where Koch curves are superimposed on Moore curve. Two distinct MKHFA’s are designed as MKHFA with LFL and MKHFA with RFL. In order to attain the more number of frequency bands, improved gain, better impedance matching and improved bandwidth, both the MKHFA’s are loaded with Split Ring Resonator (SRR). Proposed antennas are designed on FR4 glass epoxy substrate with thickness 1.6 mm, relative permittivity 4.4. Results of Moore Antenna has been compared with MKHFA and found that MKHFA exhibits multiband behavior. A comparison between unloaded MKHFA using LFL/RFL and loaded MKHFA using LFL/RFL has been made and found that later case exhibits better results in terms of increase in number of frequency bands, bandwidth enhancement and improvement in gain. Prototypes of proposed MKHFA using LFL loaded with SRR and MKHFA using RFL loaded with SRR have been fabricated and tested for their results. The comparison between the simulated and measured results have been done and found in good agreement with each other. The overall dimensions of proposed MKHFA using LFL/RFL loaded with SRR is 25 mm × 25 mm and can be useful for different wireless applications such as Bluetooth (2.41–2.49 GHz) for ISM band, IEEE 802.11 g/b (2.40–2.48 GHz), WiMAX (2.5–2.69 GHz), WLAN (5.15–5.35 GHz), X-band satellite communication (7.1–7.76 GHz). Proposed MKHFA using LFL loaded with SRR also reports peak gain 5.76 dB and bandwidth 770 MHz, whereas, MKHFA using RFL loaded with SRR confirms peak gain 8.56 dB and bandwidth 750 MHz.