LAUSR

BACKGROUND The effectiveness of aerosol disinfection processes based on peracetic acid (PAA) might differ depending on the surface targeted. Especially antibacterial, oligodynamic materials have to be regarded as they could cause elevated decomposition of PAA. AIM This study aimed on the determination of differences in disinfection effectiveness using PAA caused by the treated material. METHODS Aerosol disinfection of Geobacillus stearothermophilus spores was performed on the antibacterial, oligodynamic materials copper and brass in comparison to stainless steel and aluminium as well as polyvinylchloride, wood, and ceramics. Additionally, the influence of the materials on the decomposition reaction of PAA was evaluated. RESULTS For aluminium and stainless steel as well as ceramics and polyvinylchloride, a disinfection of 106 spores of Geobacillus stearothermophilus on 40 cm² was obtained by the employment of 60 mL aerosolized disinfectant/m³ on laboratory scale (0.5 m³). For the application on the oligodynamic materials copper and brass an over 30% higher amount of disinfectant was necessary to achieve significant disinfection results, than for the other material surfaces. In contrast to aluminium and stainless steel, copper and brass caused elevated decomposition of PAA what seems to be the reason for the lowered disinfection effectiveness. CONCLUSIONS Applying aerosol disinfection processes, in addition to parameters such as room size and geometry, the treated materials have to be considered when determining the necessary amount of disinfectant.