LAUSR

Abstract Calculation of noise reduction and acoustic impedance of the duct system is needed for the one-port source model, which is widely used in the field of duct acoustics for extracting the source characteristics and predicting the radiating noise at the open end. The flow field in the duct influences the acoustic characteristics when the flow velocity is relatively high. Recently, the time domain method has been adopted to study the flow effects on the acoustic response of the duct mufflers. However, the existing method only focuses on the calculation of transmission loss (TL) or transfer matrix. In this paper, a modified time domain approach is proposed for the first time to calculate the noise reduction and acoustic impedance of the intake duct system. In the proposed time domain model, the frequency dependent reflection at the intake port, rather the anechoic boundary used for TL calculation, is simulated by simply adding a correction pipe at the port. This approach has effectively simplified the implementation of the traditional time domain method in dealing with frequency dependent reflection at the open end. The porous sound-absorbing material commonly used in the intake system is modelled by modified equations with the material porosity and flow resistivity. The predicted time-domain sound pressure signals are then post-processed to obtain the noise reduction and the acoustic impedance in a different way from the traditional time domain TL calculation approach. The result of validation has shown that the noise reduction and acoustic impedance predicted with the modified time domain approach agree well with the measured results and the results calculated from frequency domain methods in the cases without and with meanflow.