LAUSR

Abstract In this article the “most unfavorable” shape of initial geometric imperfection profile for laminated cylindrical shell panel is obtained analytically by minimizing the limit point load. The partial differential equations governing the shell stability problem are reduced to a set of non-linear algebraic equations using Galerkin's technique. The non-linear equilibrium path is traced by employing Newton–Raphson method in conjunction with the Riks approach. A double Fourier series is used to represent the initial geometric imperfection profile for the cylindrical shell panel. The optimum values of these Fourier coefficients are determined by minimizing the limit point load using genetic algorithm. The results are determined for simply supported composite cylindrical shell panel. Numerical results show that more number of terms is needed in Fourier series representation to obtain the “worst” geometric imperfection profile which gives lower limit load compared to single term representation of imperfection. We have incorporated constraints on the shape of imperfection to avoid unrealistic limit point loads (due to imperfection shape) as we have assumed that the imperfection is due to machining/manufactuting.