LAUSR

Abstract A stiff, hydrophobic, and corrosion protective polyurethane (PU) nanocomposite coatings have been fabricated via the incorporation of surface modified cellulose nanocrystals (CNC). The modification of CNC involves surface grafting of varying levels of epoxy functionalized silane (ES). The effect of reaction time and concentration of ES on the level of grafting were evaluated using Fourier Transform Infrared Spectroscopy (FTIR), Elemental analysis (EA), X-ray photoelectron spectroscopy (XPS), water contact angle measurement (WCA) and dispersibility test. It was found that prolonged reaction time and the high mole ratio of ES to CNC improve thermal properties and material wettability of the modified CNC. The incorporation of modified CNC in PU not only improved thermomechanical properties but also reduced the water absorption properties of the PU composites, which could be attributed to the improvement in the dispersion and enhanced interfacial adhesion between the nanoparticle and the PU matrix. Salt spray and electrochemical impendence spectroscopy (EIS) studies, which were carried out on mild steel coated with the fabricated nanocomposite (PU/ES-CNC), exhibited better anticorrosion behaviors as compared to PU. Overall, the CNC modification through silanization is a robust, eco-friendly, and scalable process, making it an appealing material for a range of polymer composite applications.