Abstract To investigate enhancement effects of cavity on continuous rotating detonation (CRD), extensive ethylene-air CRD tests are conducted in the cavity-based annular combustor. By varying the length-to-depth ratio (L/D) of… Click to show full abstract
Abstract To investigate enhancement effects of cavity on continuous rotating detonation (CRD), extensive ethylene-air CRD tests are conducted in the cavity-based annular combustor. By varying the length-to-depth ratio (L/D) of cavity, five modes are distinguished and classified into three operating zones, I: Excessive Impact (deflagration and sawtooth wave); II: Proper Impact (single wave and co-rotating two-wave); III: Deficient Impact (counter-rotating two-wave). In the cavities with small L/D in zone I, excessive deflagration could inhibit the accumulation of combustible mixture, making detonation degenerate into deflagration. While the cavities with proper L/D in zone II could intensify CRD, resulting in a propagation mode transformation from counter-rotating two-wave to co-rotating mode. The added circumferential contact surface between the cavity-stabilized flame and combustible mixture is a key factor of cavity enhancement, which can pre-heat combustible mixture and reduce the detonation inducing time. Through the distribution of chemiluminescence intensity ratio, the intensity ratio peaks of deflagration and detonation are estimated to be in 40-50 mm and 20-30 mm downstream from the inlet respectively, indicating that detonation with proper cavities is accomplished in shorter distance. Overall, L/D=5.5 with the depth of 20 mm may be an optimized selection based on the evaluations of mode, reaction zone, and pressure.
               
Click one of the above tabs to view related content.