LAUSR

Abstract Traffic-related pollutant concentrations are typically much higher in near-roadway microenvironments, and pedestrian and resident exposures to air pollutants can be substantially increased by the short periods of time spent on and near roadways. The design of the built environment plays a critical role in the dispersion of pollutants at street level; after normalizing for traffic, differences of a factor of ~5 have been observed between urban neighborhoods with different built environment characteristics. We examined the effects of different built environment designs on the concentrations of street-level ultrafine particles (UFP) at the scale of several blocks using the Quick Urban and Industrial Complex (QUIC) numerical modeling system. The model was capable of reasonably reproducing the complex ensemble mean 3D air flow patterns and pollutant concentrations in urban areas at fine spatial scale. We evaluated the effects of several built environment designs, changing building heights and spacing while holding total built environment volumes constant. We found that ground-level open space reduces street-level pollutant concentrations. Holding volume/surface area constant, tall buildings clustered together with larger open spaces between buildings resulted in substantially lower pollutant concentrations than buildings in rows. Buildings arranged on a ‘checkerboard’ grid with smaller contiguous open spaces, a configuration with some open space on one of the sides of the roadway at all locations, resulted in the lowest average concentrations for almost all wind directions. Rows usually prohibit mixing for perpendicular and oblique wind directions, even when there are large spaces between them, and clustered buildings have some areas where buildings border both sides of the roadways, inhibiting mixing. The model results suggest that pollutant concentrations drop off rapidly with height in the first 10 m or so above the roadways. In addition, the simulated vertical concentration profiles show a moderate elevated peak at the roof levels of the shorter buildings within the area. Model limitations and suggestions both for urban design are both discussed.