This study is focused on the utilization of waste microalgal sludge (MS) from microalgal extraction and its potential as an electrode material. The MS was activated under N2 at high… Click to show full abstract
This study is focused on the utilization of waste microalgal sludge (MS) from microalgal extraction and its potential as an electrode material. The MS was activated under N2 at high temperature for conversion to biochar (MSB). In addition, cobalt (Co; metal hydroxide) and chitosan were used as a mediator for electron transfer by immobilization on MSB (MSB/Co/chitosan). Through analysis of the surface and components of the MSB/Co/chitosan, it was shown that Co and chitosan were properly synthesized with MSB. The enzymatic fuel cell (EFC) system successfully obtained a power density of 3.1 mW cm-2 and a current density of 9.7 mA cm-2. In addition, the glucose biosensors applied with the developed electron transfer mediator showed a sensitivity of 0.488 mA mM-1 cm-2.
               
Click one of the above tabs to view related content.