LAUSR

Abstract The hydrodynamic behavior of a turbulent flow and the mixing characteristics generated by a V-grooved axial impeller inside an agitated tank reactor were investigated both experimentally and numerically. Angle resolved Particle Image Velocimetry (PIV) techniques with an angular displacement Δθ = 5° have been applied and two aerodynamic planes along the blades were considered. PIV-based results were compared to those obtained by Large Eddy Simulation (LES), used with the dynamic Smagorinsky-Lilly sub-grid scale (SGS) model. Results showed the existence of distinctive recirculation zones in the aerodynamic planes, and new additional frequencies in the impeller stream, induced by the grooves. A decrease of mixing time of about 11% was obtained experimentally, consequence of the better suction induced by the grooved blades in the early stages of mixing. Mean velocities, vorticity, TKE obtained from LES showed a good agreement with the PIV-based results. The distributions of turbulence dissipation rate e were similar to those obtained from PIV, however showing high under-predicted magnitudes.