LAUSR

Abstract Old industrial landfill leachate (OILL) poses a significant challenge to the environment, due to the large volumes of the solid waste directly discharged into landfills which leach out by percolation during rainfall and degradation of organic waste. Various separation processes have been used for the treatment of OILL to reduce environmental pollution. The innovation in the present study is the integration of membrane ultrafiltration (UF) process with chemical coagulation to remove pollutants such as total dissolved solids (TDS), conductivity, turbidity, and color from an OILL. Various coagulants such as ferric chloride (FeCl3), activated carbon (AC) and their combinations with alum ((Al(SO4)3) and lime (Ca(OH)2) were used to optimize pretreatment by coagulation. Experiments were conducted by varying the composition of coagulants and sedimentation time. Reduction in parametric values of TDS from 3200 to 1500 mg L-1, conductivity from 5.00 to 2.34 mS cm-1, turbidity from 226 to 1 FAU, color from 2930 to 10 Pt-Co, and pH from 8.23 to 4.86 were achieved by a combination of coagulation by FeCl3 and UF membrane process. Moreover, greater removal of turbidity and color of 98.7% and 99.48%, respectively were observed. Further, the coagulation kinetics were established on the basis of the pH of the supernatant liquid through modeling using SMOLUCHOWSKI equation and observed to follow first-order kinetics. FeCl3 coagulant + UF was found capable of promoting maximum removal of color and turbidity compared to the other combinations. The integrated process exhibits advantages of small footprint of equipment used, economy, environmental safety, low energy consumption, and ease of scale-up for OILL treatment with simultaneous water reclamation of at least 70%.