LAUSR

Abstract To study the impact of rare earth oxide doping on the thermal failure of thermal barrier coatings, 0.5 mol%, 1.0 mol% and 1.5 mol% Nd2O3-doped YSZ coatings were prepared by explosive spraying. SEM, XRD, EDS and microhardness testing were used to analyse the effect of different rare earth oxide doping contents on the morphology, composition and mechanical properties of the coatings. With an increase in the Nd2O3 doping content, the porosity of the coatings was reduced. The decrease in the porosity increased the compactness of the coatings and improved the microhardness and fracture toughness. The bonding strength and thermal shock resistance of the coatings were the highest among the samples herein when the rare earth doping content was 1.0 mol%, and the values were 37.6 MPa and 200 times, respectively. The thermal shock failure mode of the coating was mainly due to the exfoliation of the inner layer of the ceramic layer. The luminous intensity of the coating increased with increasing rare earth oxide doping content, and the emission spectrum of the Nd2O3-modified YSZ coating after the thermal shock test produced a new emission peak at 594 nm, which decreased at 708 nm.