LAUSR

Abstract Metal-bonded diamond tools are widely used for machining hard and brittle materials such as ceramic and stone. The metal bonds are normally based on alloys composed of Fe, Co, Ni, Cu, Sn, Zn, or Cr. However, high heavy metal concentrations are hazardous to the environment and tool operators. Furthermore, the high density of these metal bonds results in excessively heavy tools, requiring high energy and intensive labor during operation. Therefore, we propose two environmentally friendly and lightweight metal bonds based on NiAl and FeAl intermetallics for diamond tools by reactive hot-press sintering. The effect of sintering temperature on the microstructure and mechanical properties of NiAl and FeAl was examined and the tribological behavior of NiAl and FeAl on Si3N4 ceramic balls was investigated. Grinding performance of the sintered diamond tools on Si3N4 ceramic was also compared. Our results reveal that B2-ordered NiAl and FeAl are obtained at sintering temperatures in the range of 700–1100 °C. The relative density of sintered NiAl is higher than that of FeAl, while the Vickers hardness and flexural strength of NiAl are lower than that of FeAl. Compared with FeAl, NiAl demonstrates higher wear resistance in a friction test against Si3N4 ceramic, while FeAl-bonded diamond tools demonstrate a higher grinding ratio than NiAl-bonded diamond tools due to enhanced self-sharpening ability. Nevertheless, diamond tools based on both NiAl and FeAl can be used to grind Si3N4 ceramics.