LAUSR

Solutions of 200 mg L-1 cefalexin (CLX), an antibiotic with high usage frequency and biodegradation resistance, have been comparatively degraded by electro-Fenton (EF) and photoelectro-Fenton (PEF) processes using two kinds of activated carbon fiber (ACF) cathodes with different physical properties. These two ACFs shared similar pore volumes and pore diameters but varied BET surface areas, which were confirmed to be 0.5210 cm3 g-1, 2.26 nm and 921 m2 g-1 for ACF1, while 0.6508 cm3 g-1, 2.16 nm and 1206 m2 g-1 for ACF2, respectively. Their oxidation abilities were comparatively assessed in terms of degradation kinetics and mineralization rates, which increased in the order: ACF1-EF < ACF2-EF < ACF1-PEF < ACF2-PEF. These results confirmed the superiority of ACF with higher surface area, which was correlated to faster H2O2 and OH accumulation in more reaction sites provided. After 120 min electrolysis, ACF1 exhibited 1510 μM H2O2 and 37 μM OH accumulation, while ACF2 generated 1934 μM H2O2 and 85 μM OH. Moreover, ACF cathode with more developed pore structure also revealed faster formation of degradation by-products like inorganic ions (NH4+ and NO3- ions) and short-chain carboxylic acids (acetic, formic, oxamic and oxalic acids), as well as enhanced removal for partial acids. In order to gain a deeper understanding of degradation mechanisms for ACF2-PEF system, evolutions of six aromatic by-products generated from sulfoxidation, hydroxylation and decarboxylation were confirmed by UPLC-QTOF-MS/MS determination. Based on the above identifications of the degradation intermediates, a plausible reaction pathway for CLX removal was proposed.