LAUSR

Drinking water safety cannot be overemphasized. Filamentous fungi have many excellent features for metal removal. Both graphene oxide (GO) and activated carbon (AC) are conventional metal adsorbents, but they are not suitable for large-scale use due to high cost. In this study, a low dosage of conidia (2.0 × 104 conidia/mL) of metal-resistant/adapted filamentous fungus Penicillium janthinillum strain GXCR were co-immobilized with a low dosage of 0.5 mg/L GO or 0.5 mg/L AC by embedding in 2% polyvinyl alcohol (PVA)-3% sodium alginate (SA), generating six types of microbead adsorbents (MBAs) to remove metals from a low concentration of either single metal (100 mg/L) or mixed metals (100 mg/L each) of Pb (II), Fe (III) and Cu (II) in drinking water. Fungus GXCR-containing MBAs had higher specific surface areas (SSAs), better mesoporous structures, and a higher removal rate (85-98.99%) of single or mixed metals. Singl-metal adsorptions of MBAs were almost unaffected by temperature changes. MBAs showed a stable removal rate of 87-94% during four cycles of adsorption-desorption of single metal. Single-metal adsorptions were well described by multiple models of Freundlich isotherm with constant values of 0.21-0.432, Langmuir isotherm with constant values of 0.037-0.17, Pseudo-fist-order, Pseudo-second-order, and intra-particle diffusion (IPD). In conclusion, co-immobilization between GXCR, GO and AC can make metal removal more efficient. Adsorption capacity is increased with SSAs but not in the same proportion. Single-metal adsorptions involve multiple mechanisms of monolayer and multilayer adsorptions, external mass transfer, and IPD. IPD is important but not the only one rate-controlling step for single-metal adsorptions.