LAUSR

Abstract Resin flow during Vacuum Assisted Resin Transfer Molding (VARTM) process, when distribution media (DM) is placed on top of the reinforcement, is largely affected by variation in through the thickness permeability of a woven fabric. The variation in permeability is due to the random pinhole regions around the junctions of fiber tows as they are woven together to form a fabric preform. We characterize and model this pinhole effect on resin flow with the aim of exploring the role of DM permeability ( K DM ) on void formation. It was found that percentage of voids increases with higher K DM . Five hundred simulations were executed for low, medium and high K DM values and their effect on resin flow and void formation was investigated. Twenty experiments for each DM case were conducted. Flow along the bottom surface was recorded with time. It was observed that the flow front along the bottom became more uneven and irregular with higher K DM , which resulted in higher percentage of voids formed during the process. The numerical simulations qualitatively and quantitatively agreed with the experimentally measured behavior exhibiting higher percentage of unfilled region with increasing DM permeability.