LAUSR

Abstract The rheology of cement pastes containing cellulose nanocrystals (CNC) was assessed. Nine CNC obtained from various sources were added to cement pastes. Cement pastes were made using Type I/II and Type V cement with CNC addition rates from 0.023 vol% –3.311 vol%, relative to dry cement. Pastes were made using water to cement ratios of 0.30, 0.35, and 0.40. A Bingham model was used to evaluate changes in yield stress. The goal of these experiments was to identify the characteristics of the CNC which impact rheological behavior. The results showed the rheological behavior of cement pastes with CNC was not strongly related to Zeta potential, average CNC particle length, nor the average CNC particle respect ratio. However, it was found that maximum yield stress reduction occurred at higher CNC dosages as water to cement ratio increased. In addition, the rheological measurements suggested that at lower dosages (