Photo by pete_nuij from unsplash
Abstract Spreader Stoker thermal power plants are initially used to burn bagasse during the sugarcane harvest, but also coal when the season is over. The drawback is that, compared to… Click to show full abstract
Abstract Spreader Stoker thermal power plants are initially used to burn bagasse during the sugarcane harvest, but also coal when the season is over. The drawback is that, compared to standard pulverized coal fly ashes, the coal fly ashes resulting from this process contain many more unburned particles. Therefore, Spreader Stoker Coal Fly Ash (SSCFA) is sent to landfill despite its potential for valorisation in construction. The main objective of this work was to evaluate the potential of laboratory manufactured composite cements incorporating SSCFA by using a variety of manufacturing methods, such as co-grinding/separate grinding of the components, and grinding of laboratory cements to equivalent global fineness. The behaviour in the fresh, hardening and hardened states was investigated to bring out the influence of Blaine specific surface and type of addition in different combinations of composite cements. Despite the high carbon content of the coal fly ash studied, the mechanical behaviour of SSCFA-cements was better than that of cement with the local pozzolan, which is the reference in Reunion Island. In addition, the use of slag and the pozzolan/SSCFA association in composite cements showed good results. An artificial neural network approach was employed to predict compressive strength in mortars with parameters such as amounts of clinker, gypsum, pozzolana, SSCFA and slag, and the Blaine specific surface. The results also enabled compressive strength response curves to be developed for mixes according to the amount of clinker in the cements.