LAUSR

Abstract Calcined ginger nut (CGN) has been applied in grouting mortars for anchoring unstable earthen sites, but the lack of scientific research limits its application. In this study, CGN-based grouts admixed with fly ash (F), quartz sand (S), or both are evaluated. To explore the optimal mixture ratios, three types of mixing groups (five proportion gradients in each group) are established. All the grout specimens are buried and maintained outdoors, and their physical (shrinkage rate, density, elastic wave velocity, and permeability) and mechanical properties are continuously examined over 180 days. The solidification processes at different ages are simultaneously observed by means of scanning electron microscopy (SEM) images. The results indicate that the physical properties of grouts are influenced significantly by initial moisture content but then remain steady for approximately 15 days. Quartz sand can effectively reduce the shrinkage rate of grouts as well as adjust their density and permeability, and might be considered as an ideal mixing material for CGN. In the solidification process, grouts are rapidly solidified after the initial hydration reaction, and the carbonation reaction in the later stage constantly improves their mechanical strength, with physical properties kept relatively stable. SEM images show fly ash and quartz sand particles are cemented by CaCO3 crystals. Through comprehensive comparison, the grouts with the mass ratio of CGN and S at 1:1 are found to better satisfy requirements that grouts should be compatible with earthen sites.