LAUSR

Abstract Above-ground forest productivity can be reliably estimated from tree-ring width measurements. In doing so, annual growth is linked to the tree’s basal area increment (BAI), which is the change in cross-sectional area associated with each annual ring. When BAI is estimated from ring-width series, a value for the diameter of the tree is required. This diameter is ideally measured in the field, but can also be estimated as the sum of the annual ring widths. Tree biomass can also be estimated directly from the diameter estimates derived from tree-rings. Summing the ring widths, however, typically underestimates the tree’s true diameter. To evaluate this potential bias in diameter, we compared field-measured diameter and diameter estimated from the sum of the ring widths using tree-ring chronologies for seven common species in the eastern United States. We then evaluated the impacts of using the biased diameter estimates on derived BAI and biomass values. To simulate field-sampling error (i.e., failure to reach the pith when obtaining a core sample), we re-calculated BAI and biomass after removing a portion of the innermost rings from each tree. Comparisons of these various methods quantify the substantial and consistent underestimations in forest productivity estimates. To reduce the bias in diameter when using ring widths, we developed a regression model to adjust the diameter using core samples. This model is predicated on having some field-measured diameter values available at a site to calibrate and validate the model, but it can then be used to produce estimates at similar sites with similar species where no field-measured diameter values are available. Values of BAI and biomass derived from model-estimated diameter were more accurate at representing absolute growth than values produced by using the sum of the ring widths. Assessing the interannual variations in tree-growth is dependent on having metrics that accurately reflect the area and mass of wood produced. Our results suggest that published estimates of BAI and biomass using the sum of the ring widths to estimate diameter have substantially underestimated these productivity metrics. Our new procedure allows for more reliable estimates of productivity metrics that use diameter-at-breast height derived from tree rings.