LAUSR

Abstract Ultra-fine diamond grains are used to prepare agglomerated diamond (AD) abrasives that are, in turn, applied to make fixed agglomerated diamond abrasive (FADA) pads. The as-prepared pads demonstrated very low removal efficiency along with a poor processing stability，which limits the applicability of ultra-fine diamond grains in fixed abrasive tools. In this reported research, mixed-size agglomerated diamond (MAD) abrasives with a combination of ultra-fine diamond grains and coarser diamond grains were employed to make FADA pads for lapping BK7 glass. Three types of FADA pads were manufactured with ultra-fine AD abrasives, coarser AD abrasives and MAD abrasives, respectively, for maximizing the process efficiency and stability of fixed abrasive pads consisting of ultra-fine diamond abrasives while improving the surface quality of the lapped glass substrates. The results showed that a FADA pad with MAD abrasives exhibited higher material removal rate (MRR) than a pad with AD abrasives of ultra-fine diamond grains only and lower surface roughness Ra and better surface microstructure than a pad with AD abrasives of coarser diamond grains. The distinct lapping feature of MAD abrasives was that the coarser diamond grains mainly accelerate the lapping efficiency while the ultra-fine diamond grains improved the surface quality of workpiece.