LAUSR

Abstract Piezoelectric energy harvesters have been studied extensively because they show considerable promise for use in both military and commercial applications. In this work, research was conducted into the core component of a piezoelectric energy harvester, i.e., the piezoelectric cantilever. The phenomenon where the piezoelectric cantilever has a very low output when no substrate layer is present can be explained using neutral plane theory. The relationship between the neutral plane's position and the piezoelectric cantilever’s output power can be studied in depth through analysis of this phenomenon. A mathematical model of a vibrating piezoelectric cantilever is established and the neutral plane position and open-circuit voltage of a vibrating piezoelectric cantilever are deduced based on Euler-Bernoulli beam theory. Calculations and finite element simulation results show that the neutral plane's position in the piezoelectric cantilever is dependent on the elastic moduli and thicknesses of the piezoelectric and substrate layers and that the output of the piezoelectric cantilever is also closely related to the neutral plane's position. To study how the neutral plane's position affects the output power of the piezoelectric cantilever, polyvinylidene fluoride (PVDF) piezoelectric cantilevers with different substrate layers but the same piezoelectric layer were fabricated and the output powers of these layers were measured. Experimental results show that the composite piezoelectric cantilever’s performance is enhanced in terms of its output voltage, average power and power density as the neutral plane is gradually moved further away from the mid-plane of the piezoelectric layer.