LAUSR

Abstract The Newmark sliding block approach is a common means of evaluating permanent displacements of slopes undergoing seismic loading. However, the conventional Newmark approach omits the presence of multiple shear zones or regions of dispersed shear movement. The occurrence of these shear movements within slopes can often materialize with added vertical and lateral movements above the basal failure surface typically considered in the conventional Newmark approach. This study modifies the conventional Newmark sliding block approach by discretizing a given slope into a series of nested, critical failure wedges, each with an associated yield acceleration, termed a Nested Newmark Model (NNM). Use of the NNM enables assessment of a post-earthquake slope profile within a limit equilibrium framework based on the integration of relative displacements from the toe to the crest. The results demonstrate a different response than conventional Newmark approaches. The model outputs can account for the restriction of toe movements as well as heaving and slumping behavior of the slope face and crest, respectively. Larger seismic excitation resulted in further destabilization of nested wedges near the crest. The presented approach establishes a framework that can be extended to any type of failure geometry or series of failures, including rotational geometry. These results are compared to a numerical model, which exhibit similar behavior. This framework is conceptual, but builds upon the well-accepted Newmark sliding block approach to provide an alternative means of assessing post-earthquake slope movements.