LAUSR

Abstract The maldistribution in the parallel multiple channels commonly leads to a reduction in the efficiency of heat exchangers and even causes the equipment to suffer the risk of failure. The distribution of gas-liquid two-phase slug flow when moving through the parallel multiple channels is still an unresolved problem and limited by the lack of experimental data. This work presents an experimental study on the air-water two-phase flow in the parallel multiple channels characterized by a horizontal header and 2∼4 vertically-upward branches under the slug flow pattern conditions and develops a new predictive model. The effects of inlet superficial velocities and branch number have been investigated in the ranges of inlet gas and liquid superficial velocities of 1.4∼25.0 and 0.2∼1.7 m·s-1, respectively. Results show that the distribution characteristics of two-phase slug flow highly depend on the inlet superficial velocities which manifest in that the peak value of liquid phase flow ratio shifts to the downstream branches sequentially as the inlet superficial velocities increase. Decreasing the branch number is beneficial for the uniform distribution of each phase. A predictive model is proposed for the distribution of air-water slug flow by considering the effects of superficial velocities and branch number. The new model achieves the agreement of 91.3% for prediction distribution within the range of ±25% when compares to present experimental data and shows good agreement with previously reported experimental results of both T-junction and parallel multiple channels. The acquired experimental data and predictive model are crucial for the development and optimal design of the heat exchangers.