LAUSR

Abstract Laser backscattering imaging (LBI) is a low-cost technology proposed to determine non-invasively composition and microstructural characteristics of agro food and dairy products. The aim of this work was to define the effect of different acquisition conditions (wavelength, object distance and angle of laser incidence) and to analyse the laser-light backscattering changes caused by additional hot air drying and proteolysis of dry-cured ham slices. The feasibility of the technology to determine water content and proteolysis (which is related to textural characteristics) of commercial sliced dry-cured ham was also evaluated. Results showed that a red laser (635 nm) is more convenient than a green laser (532 nm) to analyse dry-cured ham but no preferable angle or object distance to evaluate dryness or proteolysis was found. Nevertheless, light scattering parameters were modified depending on the acquisition conditions used. Laser backscattering was influenced by both dryness and proteolysis intensity showing an average light intensity decrease of 0.2 when decreasing water content (1% weight loss) and increasing proteolysis (equivalent to one-hour enzyme action). However, a decrease of scattering area was only detected when the water content was decreased (618 mm 2 per 1% weight loss). Changes on scattering of light profiles were only observed when the water content changed. Although there is a good correlation between water content and LBI parameters when analysing commercial samples, proteolysis index has an important effect on the response. This fact hinder estimation of dry-cured ham composition and textural characteristics of dry-cured ham.