Abstract An efficient method to upgrade bio-oil derived from fast pyrolysis of woody biomass was investigated in supercritical ethanol without external hydrogen supply. A set of Ni-based catalysts (Ni, Ni-Mo,… Click to show full abstract
Abstract An efficient method to upgrade bio-oil derived from fast pyrolysis of woody biomass was investigated in supercritical ethanol without external hydrogen supply. A set of Ni-based catalysts (Ni, Ni-Mo, and Mg-Ni-Mo) supported on activated charcoal (AC) was tested to understand their catalytic effect on the yield and the quality of upgraded liquid fuel in supercritical ethanol. Mg-Ni-Mo/AC was found to be the most effective catalyst among the tested Ni-based catalysts; the liquid product obtained at 350 °C showed the highest yield (70.5 wt%) and the lowest oxygen-to-carbon (O/C) molar ratio (0.19). The catalyst also formed the lowest amount of solid product (9.8 wt%) at 350 °C by suppressing coke formation. At 350 °C, a higher quality liquid product with a total acid number (TAN) value of 6.2 mgKOHg−1 and a higher heating value (HHV) of 33.4 MJkg−1 was obtained compared with bio-oil feed (TAN: 48.0 mgKOHg−1 and HHV: 19.5 MJkg−1). A gas chromatography–mass spectrometer (GC–MS) analysis of the liquid product demonstrated that major oxygenated components in the bio-oil feed such as acids, aldehydes, and levoglucosan were effectively destroyed through hydrogenation, esterification, and deoxygenation reactions in the catalytic upgrading process.
               
Click one of the above tabs to view related content.