LAUSR

Abstract Among innovative freezing processes, electromagnetic wave assistance during freezing has received great attention in recent years. The literature provides interesting studies indicating that smaller ice crystals may be obtained during freezing with the assistance of microwaves. In the companion paper, we designed a laboratory scale prototype to perform experiments of this type in well controlled conditions at 2.45 GHz. In the current study, we performed freezing experiments using this prototype and developed a protocol to measure ice crystal sizes using X-ray micro-tomography. The methodology was first validated by measuring ice crystal distribution in unidirectional conventional freezing. Then several microwave assisted freezing modalities were studied. Experiments were conducted with pulsed and continuously applied microwaves. The impact of microwave irradiation time was studied at a constant incident microwave power, and then at constant energy supplied to the system. We observed a significant reduction of up to 25% in ice crystal size when microwave assistance was used during freezing with both pulsed and continuously applied microwaves. These observations tend to disconfirm the hypothesis in the literature according to which ice crystal size reduction is due to temperature oscillations. The only remaining hypothesis in the literature is that ice crystal size reduction may be due to the perturbation of the H-bond network in water, which could be a precursor to crystalline structure. It appeared that at constant incident microwave power, the increase in irradiation time tended to decrease ice crystal size. No significant difference in ice crystal size reduction was observed for a constant energy supplied to the system. The amount of energy supplied by microwaves seems to be a factor influencing ice crystal size. Industrial relevance Microwave assisted freezing is an emerging process which permits reducing ice crystal size, and thus improving frozen product quality. The measurement of ice crystals in samples frozen in controlled conditions of both freezing and microwave irradiation allows studying the main parameters that induce the reduction of their size. Better understanding of the relevant factors influencing nucleation and/or crystal growth can help to optimize the process.