LAUSR

Abstract In composite structures, the strength of a standard single-lap joint with multiple bolts at best matches the strength predicted by the standard open-hole tension (OHT) test, which is about 50% of the tensile strength of the unnotched material. Although bonded joints do not have such limitation, they carry other drawbacks. The advantages of bolting and bonding may be combined in hybrid/bonded-bolted (HBB) joints. This study investigates HBB joints using carbon and glass-fiber reinforced composites with up to three bolts. It is found that multi-bolt specimens with or without adhesive fail in net-tension at the outer bolts like in OHT tests. However, HBB joint is not anymore limited by the OHT strength. The addition of the adhesive increases the strength of a three bolts joints by 70% for cross-ply laminates and 30% for quasi-isotropic laminates. The synergy between the bolts and the adhesive in the HBB system is interpreted by the fact that the outer bolts limit peel stresses and concurrently, the adhesive reduces the stress concentration around the bolts. This is particularly important for the cross-ply configuration where the stress concentrations around the holes are high. Other features observed suggest that for multi-bolted HBB joint, only external bolts are needed. Such joint configuration combines the safety provided by the bolts and the efficient load transfer provided by the adhesive.