LAUSR

Abstract Iron-nickel based stainless steel (SS) applied in nuclear plants as a substrate material barely suppresses the permeation of hydrogen plasmas, which are mainly composed of positive and negative hydrogen ions with trace amounts of non-ionized hydrogen atoms. In this work, a new Cr2O3/Al2O3 bipolar oxide barrier was prepared using atomic layer deposition (ALD) of Al2O3 on a Cr2O3 layer that was generated by removing partial oxides with cyclic voltammetry (CV) of SS that had been pre-oxidized at 550 °C in air. We found that a small layer of α-Al2O3 was formed by the template effect of Cr2O3 at the interface of this composite film. The hydrogen permeation behavior of this bipolar oxide barrier in a fusion reactor was simulated with hydrogen-discharging plasma treatment. The results demonstrated that the hydrogen permeation resistance of this bipolar oxide was superior to the original oxide or a Cr2O3 film. Impressively, hydrogen plasma treatment repaired the bipolar oxide via reduction of the defective CrO3, resulting in an improvement in the hydrogen permeation resistance. These findings demonstrate a novel method of hydrogen permeation barrier preparation on SS, providing insight into hydrogen barrier construction for future nuclear energy applications.