LAUSR

Abstract Hematite is a promising material for photoelectrochemical (PEC) water oxidation due to its narrow bandgap and chemical stability in alkaline electrolytes. However, the PEC performance of hematite is known to be inhibited by a short carrier diffusion length and slow kinetics for the oxygen evolution process. The rational control of morphology, crystallinity, and interfacial charge transfer plays an important role in tuning the PEC performance of α-Fe2O3 photoelectrodes. In this study, different iron oxide nano/microstructures are synthesized by the sintering of iron sheets in air at different temperatures. The synergetic effect of the surface morphology and crystallinity on the photocurrent and onset potential of the photoanode is investigated. The coral-like structure with high index (104) facets prepared at a high temperature shows a decreased onset potential, suggesting a strong correlation between the onset potential and crystalline orientation. To further improve the photocurrent density of this hematite photoanode, cupric oxide-hematite heterostructures are explored. An obvious improvement in the photocurrent density is observed from 1.1 to 1.6 V. The resulting α-Fe2O3/CuO photoanode exhibits a photocurrent density of 1.5 mA cm−2 at 1.6 V, 25% higher than that of the pristine hematite. The Mott-Schottky plot and EIS measurement indicate that the α-Fe2O3/CuO heterojunction facilitates the extraction of the accumulated holes in the hematite through a type-II band alignment and the CuO can serve as a catalyst for promoting the oxygen evolution reaction.